The remote control method of Kuka robot is realized through TMVA AR remote after-sale service system

The Kuka robot is assumed to be a static IP with the address of 182.168.0.1 and the submask of 255.255.255.0.

Step1: Connect the network port of the intelligent base station box LAN2 and the X47 network port of the robot control cabinet CCU through the network cable.

Figure 1-AR Remote After-sales Service System

Step2: Start the PC client of AR remote after-sales service system and enter the network port /USB remote configuration page.

Step3: As shown in Fig. 3, set the IP address as 192.168.08.x and the subnet mask as 255.255.255.0:

Figure 2-PC client

Figure 3-IP configuration interface

Step4. Enter MSTSC in operation on PC and confirm:

       Step5. Pop up the remote desktop connection interface and input the IP address of the library card robot (192.168.0.1).

       Step6. You need to enter the user name and password of Kuka robot system administrator

Note: You can select the robot and its operation mode by rotating the key, turn back the key and switch to the SmartPad RDP mode. At this time, the instructor is connected to the controller.